Page History

Use this task to modify facility configurations, including affiliated providers and NPI numbers.

The facility configuration includes information collected on the following tabs:

Step-By-Step Guide

Step

Instructions

Additional Information

1

From the Facilities page, select the facility to be modified.

2

General Facility Information Tab

Click Update. The Facility: [name] page opens with the General Facility Information tab displayed.

Update the relevant information via the applicable steps below...

3

In the Facility Name and Address section, enter the name of the facility in the Facility Name field.

4

Enter of the street address for the facility in the Address line 1 and line 2, if applicable.

5

Enter the zip code for the facility in the Zip Code field.

6

(Optional) Enter the name of the city for the facility in the City field.

Note
The City field auto-populates based on the value entered for the Zip Code field, but can be updated, if necessary

7

(Optional) Open the State drop down list and select the state for the facility.

Note
The Statefield auto-populates based on the value entered for the Zip Code field, but can be updated, if necessary

8

(Optional) Enter the phone number for the facility in the Phone Number and Ext. fields.

9

(Optional) Enter the fax number for the facility in the Fax Number and Ext. fields.

10

In the Identification section, enter the nine digit employer identification number in the EIN field.

11

Enter the state-issued license number in the State License Number field.

Info
This is necessary to bill Medicare claims if the facility rendered services to patients in an Assisted Living Facility (designated on the case in charge entry) and the facility does not have an NPI number

12

Enter the 10-digit Clinical Laboratory Improvement Act number for procedures related to laboratory tests in the CLIA Number field.

13

Open the Medicare Locality drop down list and select the geographic location indicator for Medicare claims.

14

(Optional) In the Billing section, select the Allow directed only CRNA services checkbox to allow users to enter a directed CRNA on the case without entering a directing provider.

15

In the Practice Affiliations section, mark the checkboxes next to each practice with which the facility is affiliated.

Info
If a facility is affiliated to a practice that is not listed, create the practice in Connect Back Office, and then return to this page and affiliate it.

Note
Use the Select All/Select None button to check all boxes or clear all boxes, as necessary.

16

In the Place of Service Types section, mark the checkboxes to select each place of service type that applies to the facility.

Note
Use the Select All/Select None button to check all boxes or clear all boxes, as necessary.

17

Click Apply.

18

Affiliated Providers Tab

Click the Affiliated Providers tab to add or remove providers affiliated with the facility.

19

Open the Filter drop down list and select an option to specify which affiliation status list to manage.

The options include:

All Providers
Affiliated Providers
Unaffiliated Providers

20

Select or deselect any checkbox in the Status field to affiliate or remove affiliation of a facility and provider.

Note

From the All Providers filtered list, select the Status checkbox of any provider to affiliate to the facility. Once the box is checked, the provider appears in the Affiliated Providers filtered list.
In the Affiliated Providers filtered list, deselect the Status checkbox of any provider to remove it from the affiliated list and add it to the Unaffiliated Providers filtered list.
In the Unaffiliated Providers filtered list, select the Status checkbox of any provider to remove it from the unaffiliated list and add it to the Affiliated Providers filtered list.
If the To affiliate all providers with the facility, select the Select all providers checkbox and click Refresh Filter to affiliate all providers with the facility.
If the Select all providers checkbox is already selected, uncheck it and click Refresh Filter to clear all provider name affiliations.

21

Click Apply.

22

Facility NPI Numbers Tab

Click the Facility NPI Numbers tab to record or modify the general or place of service specific NPI numbers for the facility.

23

Select the Facility NPI Type.

24

If General is selected for the Facility NPI Type, then enter the NPI number to use for all place of service types in the General field.

-OR-

If Place of Service specific is selected for the Facility NPI Type, then enter the NPI number for each applicable place of service in the associated NPI Number field.

25

Click Apply.

26

Click Save to save and close the page.

Panel